Page 49 - Alfa International 2023 Catalog

SLICER BLADES - HOBART

0512 SS EDGE HC-12 1612 SS,
1612 HC HS6NR

EDGE HC-4 3000 SS 8510 HC 28/1612 SS

MOUNTING
ALFA # HOBART # FITS HOBART MODELS DIAMETER HOLES
0512 SS 439870-2 512, 512BMS 11-3/4" 3 MEAT SLICERS
1612 HC N/A 1612, 1612E, 1612EC, 1712, 1712E, 1712EC, 1712R, 1812, 1912 11-3/4" 0
1612 SS 00-439870-00002 1612, 1612E, 1612EC, 1712, 1712E, 1712EC, 1712R, 1812, 1912 11-3/4" 0
8510 HC 292499 610 (Made in Italy) 10" 3
28/1612 SS 00-439870-00005 Same as above plus 2612, 2712, and all Series 2000 (Hollow Ground) 11-7/8" 0
3000 SS* 00-914753-00002 3613, 3713, 3813, 3913, HS6, HS7, HS8, HS9, does not 13" 2
fit "N"-suffix models (Made in Italy)
EDGE HC-4 915424/479446 2015 and later EDGE models 12" 4
EDGE HC-12 00-479446 EDGE models (early models) 12” 3
NEW HS6NR** 00-914753-00002 3000 Series slicer models 3613N, 3713N, 3813N, 13" 4
(S/S, Made in Italy) 3913N and HS Series models: HS6N, HS7N, HS8N, & HS9N

* To take off 3000 SS blade you need a Hobart Blade Removal Tool (OEM #00-914758)
** This blade does not need special tools to remove the blade: it mounts/dismounts with 4 screws.
SHARPENING AND TRUING STONES FOR HOBART

1612 SG 1612 T
ALFA # HOBART # FITS HOBART MODELS
1612 SG 73851-003 111, 210, 211, 311, 411, 512, 512TMS,
1512, 1612, 1712, 1712R
1612 SW N/A Same as above
1612 SW 1612 T 13201 512, 512TMS, 1512, 1612, 1712, 1712R
H-747 478747 Holder with Ceramic Truing Stone for
2612, 2712, 2812, 2912 Models
H-747
H-882 H-882 119882 Holder with Ceramic Truing Stone for
1812 and 1912 Models
H-691 439691 Steel Grinding Wheel w/ Diamond
Edge for 2000-series Models

H-691 The above parts are sold by Alfa International as replacement
parts for Hobart Slicers. Alfa is not affiliated with Hobart.
ALFA International Catalog 2019 / 2020 • Ph 914.273.2222 / 800.327.ALFA (2532) • www.alfaco.com 43